Latest Items

Buffet with Drawers woodworking plans

Added/Modified on March 16, 2015
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
VN:F [1.9.21_1169]
Rating: 10.0/10 (2 votes cast)

Dimensions

Tools
Tape Measure
Saw – Jig, Circular, or Miter
Drill
Countersink Bit for Drill
Square
Sander
Kreg Jig
Brad Nailer

Lumber
2 – 1×3 at 6’
1 – 1×6 at 3’
7 – 1×8 at 8’
Two sheets of ¾” plywood

Materials
1-1/4” pocket hole screws
Edge banding for plywood, optional
Six sets of 16” drawer slides
Six sets of drawer handles or pulls
Wood filler
Sandpaper
Wood glue
Finishing Supplies

Cut List
2 – 1×6 at 13-3/4” – Base
1 – ¾” plywood at 17-3/4” x 53-1/2” – Bottom
2 – 1×3 at 48” – Base Stretchers
2 – ¾” plywood at 17-3/4” x 25-3/4” – Sides
1 – ¾” plywood at 25-3/4” x 52” – Back
1 – ¾” plywood at 17” x 25-3/4” – Divider
1 – ¾” plywood at 17-3/4” x 53-1/2”- Top
2 – ¾” plywood at 17” x 17” – Shorter Shelves
2 – ¾” plywood at 17” x 34-1/4” – Longer Shelves
12 – 1×8 at 14-1/2” – Small & Large Drawer Sides
6 – 1×8 at 16” – Small Drawer Front & Back
3 – ¾” plywood at 14-1/2” x 14-1/2” – Small Drawer Bottoms
6 – 1×8 at 33-1/4” – Large Drawer Front & Back
3 – ¾” plywood at 14-1/2” x 31-3/4” – Large Drawer Bottoms
2 – ¾” plywood at 7-3/4” x 16-3/4” – Small Drawer Fronts
1 – ¾” plywood at 8” x 16-3/4” – Lower Small Drawer Front
2 – ¾” plywood at 7-3/4” x 34” – Large Drawer Fronts
1 – ¾” plywood at 8” x 34” – Lower Large Drawer Front

Instructions

Read through the entire set of instructions and all comments before beginning this project. If you print out or save our plans, be sure to check back before starting your build, to be sure you have the most up to date set of plans. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using.

Step 1
Edge banding should be applied to all exposed edges of plywood before assembly.Cut the pieces for the base and the bottom. Set the Kreg jig for ¾” material and drill pocket holes along one long edge of each base piece. Attach to the bottom as shown using glue and 1-1/4” pocket hole screws.Cut the pieces for the base stretchers. Drill pocket holes in each end as well as one long edge of each piece. Attach to the bottom and base pieces as shown using glue and 1-1/4” pocket hole screws.


Step 2
Cut the pieces for the sides. Drill pocket holes as shown. Attach to the bottom using glue and 1-1/4” pocket hole screws.

Step 3
Cut the piece for the back. Drill pocket holes as shown. Attach to the bottom and sides using glue and 1-1/4” pocket hole screws.

Step 4
Cut the piece for the divider. Drill pocket holes as shown. Attach to the bottom and back using glue and 1-1/4” pocket hole screws.

Step 5
Cut the pieces for the shelves. Drill pocket holes in each end as well as one long edge of each piece. Attach as shown using glue and 1-1/4” pocket hole screws.


Step 6
Cut the piece for the top. Attach using glue and 1-1/4”pocket hole screws through the holes in the sides, back, and divider into the top.

Step 7
Cut the pieces for the drawers. Drill pocket holes on all four edges of the bottom pieces as well as the ends of the shorter pieces. Assemble as shown using glue and 1-1/4” pocket hole screws. Attach the drawer slides according to the manufacturer’s instructions. For an easy tutorial, click here. Make any necessary adjustments.




Step 8
Cut the pieces for the drawer fronts. Note that the two bottom drawers are ¼” taller. There will be a 1/8” gap around all sides of the drawer fronts. For another easy tutorial, click here.

Finishing Instructions
Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired.

VN:F [1.9.21_1169]
Rating: 10.0/10 (2 votes cast)
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
Buffet with Drawers woodworking plans, 10.0 out of 10 based on 2 ratings

Comments

comments


Powered By SageFox. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
Free PowerPoint Templates - PowerPoint Slides - TagFox Memes