Latest Items

cabinet woodworking plans

Added/Modified on October 25, 2015
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
VN:F [1.9.21_1169]
Rating: 6.0/10 (2 votes cast)

Tools

Tape Measure
Saw – Jig, Circular, or Miter
Drill
Square
Sander
Kreg Jig
Brad nailer

Lumber

Full sheet of ¾” plywood
Quarter sheet of ¾” plywood
Quarter sheet of ½” plywood
Scrap of ¼” plywood at least 16” x 31-1/2”
2 – 1×3 at 8’
1 – 1×4 at 8’
1 – 8 ft. baseboard trim

Materials

1” pocket hole screws
1-1/4” pocket hole screws
1-1/4” brad nails
One set of 16” drawer slides
Two sets of hinges
Wood filler
Sandpaper
Wood glue
Finishing Supplies

Cut List

2 – ¾”plywood at 17-3/4” x 40-3/4”- Sides
1 – ¾” plywood at 32-1/2” x 40-3/4” Back
1 – ¾” plywood at 18-1/4” x 35”- Top
2 – ¾” plywood at 17” x 32-1/2” – Bottom & Divider
1 – ¾” plywood at 4” x 32-1/2” – Kick Plate
1 – ¾” plywood at 16-1/4” x 32-1/2” – Shelf
4 – 1×3 at 11-1/16” – Door Frames
4 – 1×3 at 30” – Door Frames
2 – ½” plywood at 11-1/16” x 25” – Door Panels
2 – 1×4 at 14-1/2” – Drawer Box
2 – 1×4 at 31-1/2” – Drawer Box
1 – ¼” plywood at 16” x 31-1/2” – Drawer Bottom
1 – ¾” plywood at 4-3/4” x 32-1/4” – Drawer Front
2 – baseboard trim at 17-3/4” – Side Trim
1 – baseboard trim at 35” – Front Trim

Instructions

Read through the entire set of instructions and all comments before beginning this project. If you print out or save our plans, be sure to check back before starting your build, to be sure you have the most up to date set of plans. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using.

Step 1

Edge banding should be applied to exposed edges of plywood before assembly.

Cut the pieces for the sides. Set the Kreg jig for ¾” material and drill pocket holes in the top edge.

Cut the piece for the back. Drill pocket holes in each side edge as well as the top edge. Attach to the side pieces as shown using glue and 1-1/4” pocket hole screws.

Step 2

Cut the piece for the top. Attach to the sides and back using glue and 1-1/4” pocket hole screws. The top will overlap by ½” at the front and sides.

Step 3

Cut the pieces for the bottom and divider. Drill pocket hole screws in the sides and one long edge of each piece. Attach as shown using glue and 1-1/4” pocket hole screws.

Step 4

Cut the piece for the kick plate. Drill pocket holes in each end and attach from the underside using glue and 1-1/4” pocket hole screws.

Step 5

Cut the piece for the shelf. Drill pocket holes in the sides as well as one long edge for the back. Attach as shown using glue and 1-1/4” pocket hole screws locating the shelf ¾” back from the front edge of the sides.

Step 6

Cut the pieces for the door frames. Assemble as shown using glue and 1-1/4” pocket hole screws.

Cut the piece for the center panel. Set the Kreg jig for ½” material and drill pocket holes as shown. Attach to the door frame using glue and 1” pocket hole screws. The back side of the door panel should be flush with the back side of the frame.

Attach the hinges – there will be a 1/8” gap on all sides of the doors as well as in the center.

Step 7

Cut the pieces for the drawer box. Assemble as shown using glue and 1-1/4” pocket hole screws. Don’t forget to set the Kreg jig back to ¾” material! Cut the piece for the drawer bottom. Attach to the drawer box using glue and 1-1/4” brad nails. Attach the drawer slides according to the manufacturer’s instructions.

Step 8

Cut the piece for the drawer front. There will be a 1/8” gap around all sides of the drawer front.

Step 8

Cut the pieces for the trim. Attach the side pieces first using glue and 1-1/4” brad nails, then attach the front in the same manner.

Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired.

VN:F [1.9.21_1169]
Rating: 6.0/10 (2 votes cast)
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
cabinet woodworking plans, 6.0 out of 10 based on 2 ratings

Comments

comments


Powered By SageFox. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
SageFox Free PowerPoint - PowerPoint Slides - PowerPoint Images - Social Tags - Woodworking Plans - eLiquid eJuice | Health Remedies - DIY Ally