Latest Items

country style hutch woodworking plans

Added/Modified on November 22, 2016
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
VN:F [1.9.21_1169]
Rating: 5.7/10 (6 votes cast)

Dimensions:

Shopping List:

2 sheets of ¾” plywood cut into strips 15 ¾” wide by 8 feet long (with sideboard, you may be able to get away with just 3 sheets altogether) These are referred to as 1×16 boards throughout this plan.
1 – 1×6 @ 8 feet long
5 – 1×3 @ 8 feet long
1 – 4’ stick 2 ¼” base moulding
2 – 1×4 @ 8 feet long
1 – 1×2 @ 8 feet long
2 sheets ¼” plywood or other materials for back
1 ¼” PH screws
1 ¼” finish nails
10 feet of medium to large crown moulding
wood glue
wood filler
120 grit sandpaper

Tools:

measuring tape
square
pencil
safety glasses
hearing protection
Kreg Jig™
drill
circular saw
compound miter saw
nailer
sander
countersink drill bit

Cut List:

2 – 1×16 @ 58”
2 – 1×6 @ 10 ¾”
2 – 1×3 @ 10 ¾”
4 – 1×3 @ 58”
4 – 2 ¼” base moulding @ 10 ¾”
1 – 1×16 @ 70 ½”
1 – 1×16 @ 57 ¼”
2 – 1×4 @ 34 7/8”
1 – 1×6 @ 66 ½”
2 – 1×4 @ 58”
1 – 1×3 @ 51”
1 – 1×2 @ 66 ½”
6 – 1×16 @ 34 7/8”
¼” plywood or planks for back

General Instructions

Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain.

Step 1
Let’s start by making the ends pretty. These will be at eye height. If you want, you can build the frame first, then attach to plywood second.

Step 2

Now add the moulding in. You may have to use shorter nails depending on your moulding thickness. Glue will also hold the moulding in place, as it’s just decorative.

Step 3
Now we are starting the hutch itself. Attach top and center. I recommend attaching with pocket holes, but it’s totally up to you.

Step 4
These boards will keep the back square and give you something to attach the back to. I recommend pocket holes on the back side.

Step 5
Now build the face frame as shown in diagram and attach to front of hutch. Fit so the ends are flush, making the corners look like one solid board.

Step 6
And add the crown moulding to top. You’ll want to miter the corners for a finished look.

Step 7
Shelves can be added fixed with pocket holes underneath or shelf pins.

Step 8
Because of the size of this project, you will need to add two back panels as shown here. Carefully glue and nail to back of project.

When you attach to your sideboard, be sure to securely screw to wall behind to prevent tipping forward, and also it is recommended that you attach to sideboard as well.

Finishing Instructions
Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

VN:F [1.9.21_1169]
Rating: 5.7/10 (6 votes cast)
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
country style hutch woodworking plans, 5.7 out of 10 based on 6 ratings

Comments

comments


Powered By SageFox. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
SageFox PowerPoint - PowerPoint Slides - PowerPoint Images - Social Tags - Woodworking Plans - eLiquid eJuice | Health Remedies - DIY Ally