kids storage step stool woodworking plans
12″ tall x 15″ deep x 13 1/2″ wide
Materials and Tools
53″ of 1×12 Pine Boards
24″ of 1×6 Pine Boards
26″ of 1×8 Pine Boards
2″ Screws or 1 1/4″ Pocket Hole Screws (if you are using the Kreg Jig)
1 Set of standard hinges
countersink drill bit
2 – 1×12 @ 14″ long (Sides)
2 – 1×12 @ 12″ (Storage Box sides)
2 – 1×6 @ 12″ (Storage Box Bottom and Footer)
2 – 1×8 @ 14″ (Treads)
This plan greatly depends on the use of standard width boards, which can vary in size depending on where you live. Please measure the width of all of your boards and adjust the cuts and construction as necessary. This plan assumes 1x6s are 5 1/2″ wide, 1x8s are 7 1/2″ wide, 1x12s are 11 1/2″ wide.
Cut Sides Out
From the sides, draw the above pattern and carefully cut out using a jigsaw
Cut a notch out of one of the storage box sides. Attach both storage box sides to the sides using 2″ screws and glue or 1 1/4″ pocket hole screws and glue.
Attach the footer to the front using 1 1/4″ pocket hole screws or 2″ screws and glue.
With the remaining 1×6, add the bottom to the step stool. Attach from all sides with glue and screws.
Attach the top tread to the top with hinges. Attach the bottom tread with screws and glue.