Latest Items

King Headboard Woodworking Plans

Added/Modified on November 6, 2014
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
VN:F [1.9.21_1169]
Rating: 5.6/10 (5 votes cast)


Tools

Tape Measure
Saw – Jig, Circular, or Miter
Drill
Square
Sander
Kreg Jig
Router with flush cutting bit, optional

Lumber

5 – 2×4 at 8’
2 – sheets of ¼” plywood, lauan, or hardboard

Materials

2-1/2” pocket hole screws
1-1/4” brad nails
Wood filler
Sandpaper
Wood glue
Finishing Supplies

Cut List

2 – 2×4 at 42” – Legs
3 – 2×4 at 71” – Frame
1 – ¼” plywood at 34” x 78” – Front & Back Panels

Instructions

Read through the entire set of instructions and all comments before beginning this project. If you print out or save our plans, be sure to check back before starting your build, to be sure you have the most up to date set of plans. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using.

Step 1

Cut the pieces for the legs and frame. Set the Kreg jig for 1-1/2” material and drill pocket holes in each end of the frame pieces. Attach to the legs as shown using glue and 1-1/4” brad nails.

Step 2

Cut the pieces for the panels. The panels can be cut out with a jigsaw before assembly then attached to the frame using glue and 1-1/4” brad nails. It can also be attached to the frame first, then the opening can be cut out with a router and a flush cutting bit.

Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired.

VN:F [1.9.21_1169]
Rating: 5.6/10 (5 votes cast)
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
King Headboard Woodworking Plans, 5.6 out of 10 based on 5 ratings

Comments

comments


Powered By SageFox. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
Free PowerPoint Templates - PowerPoint Slides - TagFox Memes