Latest Items

Media Cabinet woodworking plans

Added/Modified on November 10, 2016
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
VN:F [1.9.21_1169]
Rating: 0.0/10 (0 votes cast)

Tools

Tape Measure
Saw – Jig, Circular, or Miter
Drill
Countersink Bit for Drill
Square
Sander
Kreg Jig

Lumber

2 – 2×2 at 6’
1 – 1×2 at 8’
1 – 1×3 at 3’
1 – 1×4 at 8’
2 sheets of ¾” plywood

Materials

1-1/4” pocket hole screws
3/4” screws
3 – 1/8” x 3/4” angle at 6’
Edge banding for the plywood, optional
Wood filler
Sandpaper
Wood glue
Finishing Supplies

Cut List

4 – 2×2 at 28” – Legs
2 – 1×2 at 15” – Side Frames
2 – 1×3 at 15” – Side Frames
2 – 1×4 at 15” – Side Frames
1 – ¾” plywood at 28” x 60” – Back
1 – 1×2 at 60” – Front Stretcher
1 – 1×4 at 60” – Front Stretcher
2 – ¾” plywood at 16-1/2” x 61-1/2” – Top & Shelf
2 – ¾” plywood at 17-1/4” x 23-3/4” – Dividers
12 – 1/8” x ¾” angle at 17-1/4” – Drawer & Pullout Supports
2 – ¾” plywood at 17-1/4” x 22-1/8” – Pullouts
8 – ¾”plywood at 10” x 17-1/2” – Drawer Front & Back
8 – ¾” plywood at 10” x 16-1/2” – Drawer Sides
4 – ¾” plywood at 16” x 16-1/2” – Drawer Bottoms

Instructions

Read through the entire set of instructions and all comments before beginning this project. If you print out or save our plans, be sure to check back before starting your build, to be sure you have the most up to date set of plans. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using.

Step 1

Cut the pieces for the legs and the side frames. Set the Kreg jig for ¾”material and drill pocket holes in each end of the frame pieces. Attach to the legs using glue and 1-1/4” pocket hole screws. The front face of the frame pieces will be flush with the outside face of the legs.

Step 2

Cut the piece for the back. Drill pocket holes in each of the shorter edges of the back piece. Attach to the legs using glue and 1-1/4” pocket hole screws. The outside face of the back will be flush with the outside face of the legs.

Step 3

Cut the pieces for the stretchers and drill pocket holes in each end of each piece. Attach to the legs as shown using glue and 1-1/4” pocket hole screws. The front face of the stretchers should be flush with the front face of the legs.

Step 4

Cut the piece for the shelf. Cut ¾” x ¾” notches in each corner with a jigsaw. Drill pocket holes on the underside and attach as shown using glue and 1-1/4” pocket hole screws. The top of the shelf will be flush with the top of the lower stretcher and frame pieces.

Step 5

Cut the pieces for the dividers and cut a ¾” x ¾” notch at the top front edge of each piece. Drill pocket holes as shown. Attach at the spacing indicated using glue and 1-1/4” pocket hole screws.

Step 6

Cut the piece for the top. Cut ¾” x ¾” notches in each corner with a jigsaw. Drill pocket holes on the underside and attach as shown using glue and 1-1/4” pocket hole screws. The top face of the top will be flush with the top of the upper stretcher and frame pieces.

Step 7

Cut the pieces of angle using a hacksaw. Pre-drill holes in each piece and mount to the inside of the cabinet at the spacing shown using ¾” screws.

Step 8

Cut the pieces for the pullouts and insert in the proper openings.

Step 9

Cut the pieces for the drawer boxes. Cut the notch in each of the front pieces using a jigsaw. Drill pocket holes in all four edges of the bottom as well as each end of the sides. Assemble as shown using glue and 1-1/4” pocket hole screws.

Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired.

VN:F [1.9.21_1169]
Rating: 0.0/10 (0 votes cast)
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)

Comments

comments


Powered By SageFox. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
SageFox PowerPoint - PowerPoint Slides - PowerPoint Images - Social Tags - Woodworking Plans - eLiquid eJuice | Health Remedies - DIY Ally