-
rolling bar woodworking plans
Start by preparing the wood for the top, and the middle and bottom shelves. The top is made with 2×6 cedar planed down to 1 1/4″ thick, then laminated. Make the blank slightly longer than needed at...
- Posted/Updated 6 years ago
-
modular bar cabinet woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Countersink Bit Square Sander Kreg Jig Lumber One full sheet of ¾” plywood One half sheet of ½” plywood Piece of 3-1/2” trim at 18” Materials 1-1/4”...
- Posted/Updated 6 years ago
-
modular bar grid woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Countersink Bit Square Sander Kreg Jig Lumber One full sheet of ¾” plywood One full sheet of ½” plywood Piece of 3-1/2” trim at 18” Materials 1-1/4”...
- Posted/Updated 6 years ago
-
Modular Bar Hutch Woodworking Plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Square Sander Kreg Jig Lumber One half sheet of ¾” plywood One quarter sheet of ½” plywood Materials 1-1/4” pocket hole screws Edge banding for the plywood,...
- Posted/Updated 7 years ago
-
Bar and Game Table Woodworking Plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Countersink Bit for Drill 4” hole saw Square Sander Kreg Jig Brad Nailer Lumber 3 – 1×4 at 8’ 1 – 1×2 at 3’ 3 sheets of...
- Posted/Updated 7 years ago
-
boat shaped bar woodworking plans
Getting started Begin by making a rectangular blank for the back panel of the bar, which consists of 13 narrow slats brought together with splines. Cut the slats to size, then use the tablesaw to rip a...
- Posted/Updated 7 years ago
