-
vanity step drawer woodworking plans
Shopping List: 1 set of Heavy Duty 16″ drawer slides 1 – 1×3 @ 8 feet long 1 – 3/4″ plywood 16″ x width of drawer 2 inch finish nails 1 1/4 inch pocket hole screws wood...
- Posted/Updated 6 years ago
-
bath wall shelf with hangers woodworking plans
Materials and Tools Shopping List: 1 – 1×6 @ 2 feet long 1 – 1×8 @ 8 feet long 1 – 1×2 @ 4 feet long 1 – 3/4″ x 3/4″ cove base molding 2 inch screws...
- Posted/Updated 7 years ago
-
bathroom cabinet woodworking plans
Frame up Begin by cutting the main parts to size. Next, prepare a 1/4″-thick x 1/4″-wide, two-sided groove along the rear edge of each cabinet side. These grooves, called “rabbets,” are made to accept the plywood back...
- Posted/Updated 7 years ago
-
bathroom cabinet woodworking plans
Framed This cupboard is built with simple butt joints. Begin with the sides of the cupboard and cut them to length. Factory-laminated pine is often slightly thinner than standard 3/4″-thick sheets, and the measurements in the materials...
- Posted/Updated 7 years ago
-
Bathroom wall cabinet woodworking plans
Begin by selecting material for the two sides and five shelves. Cut these parts to rough size, leaving two or three inches of extra length before dressing them to finished thickness. Joint one edge and rip the...
- Posted/Updated 7 years ago
