-
wall mounted bookcase woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Square Sander Lumber 2 – 2×2 at 6’ 2 – 1×12 at 6’ 1 – 1×12 at 3’ Materials 10 – 8” corner brackets Spray paint to...
- Posted/Updated 6 years ago
-
dollhouse bookcase woodworking plans
Dimensions: 51 1/2 ” tall by 45″ width by 12 1/4″ deep Shopping List: 4 – 1×12 @ 8 feet 1 – 1×4 @ 4 feet 1 – 1×2 @ 8 feet 1/4″ plywood cut 45″ wide...
- Posted/Updated 6 years ago
-
bookcase woodworking plans
Shopping List: 3 – 1×12 @ 8 feet long 4 – 2×2 @ 8 feet long 1 – 1/4″ Plywood full sheet 1 – 1×3 @ 4 feet long 3 – 1×2 @ 8 feet long 1...
- Posted/Updated 7 years ago
-
flat wall book shelves woodworking plans
Shopping List: 1 – 12′ 1×6 Board (cut sides out of this board) 1 – 8′ 1×6 Board (cut shelves out of this board) 3 – 1×2 Boards 40″ of 3 1/4″ Base Moulding, between 1/2″ and...
- Posted/Updated 7 years ago
-
bookcase woodworking plans
Shopping List: 1 – 4 feet long 1×12 2 – 8 feet long 1×12 2 – 8 feet long 1×2 2 – 8 feet long 1×3 4 – 8 feet long 2×2 planking for back 1 1/4...
- Posted/Updated 7 years ago
-
bookcase woodworking plans
Dimensions: 72″ tall, 39″ wide, 11.5″ deep Materials and Tools Shopping List: • 1 – 2 x 12 @ 12′ • 1 – 2 x 12 @ 16′ • 8 L-brackets 2 1/2 inch screws 2 1/2...
- Posted/Updated 7 years ago
-
kids bookcase woodworking plans
Dimensions: 33″ wide x 60″ tall x 15″ deep Materials and Tools Shopping List: 1 sheet 3/4″ MDF (about $30) 1 sheet 1/4″ plywood or paneling (about $15) 2 – 1×2 boards ($1 each) 2″ screws 1...
- Posted/Updated 7 years ago
-
corner bookcase woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Square Sander Kreg Jig Brad Nailer Lumber 1 – 2×2 at 8’ 1 – 2×2 at 3’ 2 – 1×2 at 8’ 1 – 1×3 at 3’...
- Posted/Updated 7 years ago
-
kids bookcase woodworking plans
Prepare the parts One piece of 1×8 pine 3′ in length is all you need to get started on this shelf. First, cut the two sides 11 1/2″ long. For the curve at the top of each...
- Posted/Updated 7 years ago
-
bookcase woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Countersink Bit for Drill Square Sander Kreg Jig Lumber 4 – 2×3 at 6’ Full sheet of ¾” plywood Half sheet of ¾” plywood 2 – 2×2...
- Posted/Updated 7 years ago
