-
kids picnic table woodworking plans
Little details To make the project more elegant and keep exposed end-grain to a minimum, I capped the tabletop and bench ends with strips of wood. This detail is called “breadboard” ends, and although it adds a...
- Posted/Updated 6 years ago
-
loft bed woodworking plans
Shopping List: 14 – 2×4 @ 8 feet long 4 – 2×6 @ 8 feet long 2 – 2×2 @ 8 feet long 1 – 1×2 @ 8 feet long 2 ½” PH screws Tools: measuring tape...
- Posted/Updated 6 years ago
-
vanity step drawer woodworking plans
Shopping List: 1 set of Heavy Duty 16″ drawer slides 1 – 1×3 @ 8 feet long 1 – 3/4″ plywood 16″ x width of drawer 2 inch finish nails 1 1/4 inch pocket hole screws wood...
- Posted/Updated 6 years ago
-
bunk bed woodworking plans
Dimensions: Dimensions are shown above. Fits standard 39″ x 75″ twin mattress, shown with 6″ mattresses. Shopping List: 7 – 10′ 1×4 Boards 4 – 8′ 2×2 Boards 9 – 8′ 1×3 Boards (not including wood slats)...
- Posted/Updated 7 years ago
-
kids vanity woodworking plans
Dimensions: Make that 4 – 1x12s @ 19 3/4 instead of just two. Dimensions shown above. Shopping List: 2 – 1×12, 8 feet long 24″ of 3 1/4″ base moulding (go to orange, the let you buy...
- Posted/Updated 7 years ago
-
kids bookcase woodworking plans
Prepare the parts One piece of 1×8 pine 3′ in length is all you need to get started on this shelf. First, cut the two sides 11 1/2″ long. For the curve at the top of each...
- Posted/Updated 7 years ago
-
covered sandbox woodworking plans
Dimensions: 78″ x 78″ x 60″ Shopping List: 4 – 2×8 Boards (8′ Length) 4 – 1×3 Boards (8′ Length) 4 – 2×2 Boards (8′ Length) 4 – 1×4 Boards (8′ Length) 2 inch screws 2 1/2...
- Posted/Updated 7 years ago
-
kids bookshelf woodworking plans
Dimensions: Shopping List: 1 – 3/4” plywood cut into 3 strips 15 3/4” wide x 8 feet long 2 – 1×2 @ 8 feet long 1 – 1×4 @ 8 feet long 1 sheet 1/4” plywood for...
- Posted/Updated 7 years ago
-
kids bookcase woodworking plans
The core of this project is a simple plywood bookcase. Begin by cutting out the five shelves and two sides using your tablesaw. These fit together with 3/8″-deep x 3/4″-wide dados and rabbets. To speed progress and...
- Posted/Updated 9 years ago
