Latest Items

triple pedistal farmhouse table woodworking plans

Added/Modified on October 11, 2016
VN:F [1.9.21_1169]
Rating: +3 (from 5 votes)
VN:F [1.9.21_1169]
Rating: 6.7/10 (32 votes cast)

Dimensions:

Shopping List:

1 – 2×8 @ 8 feet long
3 – 2×4 @ 8 feet long
2 – 2×4 @ 10 feet long
1 – 2×6 @ 8 feet long
3 – 2×6 @ 10 feet long
1 – 1×3 @ 8 feet long (more if not using pocket holes)
6 – 1×6 @ 8 feet long
2 – 1×2 @ 10 feet long*
1 – 1×2 @ 8 feet long
2 – 2×2 @ 10 feet long*
1 – 2×2 @ 8 feet long
2 1/2” and 3” screws
1 1/4” pocket hole screws
Wood glue
*decorative and can be spliced

Tools:

measuring tape
square
pencil
safety glasses
Kreg Jig™
drill
circular saw
jigsaw
compound miter saw
nailer
sander
level
countersink drill bit

Cut List:

LEGS
6 – 2×4 @ 21 3/4”
6 – 2×4 @ 8 1/8”
6 – 2×6 @ 34 1/4” (both ends beveled at 45 degrees, long point to long point, ends NOT parallel)
12 – 2×8 @ 7 1/4” (cut out in arch shape)
3 – 2×6 @ 36” (both ends beveled at 30 degrees off square, long point to long point, ends NOT parallel)
3 – 2×6 @ 36 1/2”
6 – 1×3 @ 5 1/2” (OR 1×6 @ 2 1/2”)
1 – 2×6 @ 90 1/2”

TABLETOP
12 – 1×6 @ 47 3/4”
2 – 2×4 @ 106”
3 – 2×4 @ 33”
2 – 1×2 @ 102 1/2”
2 – 1×2 @ 39 1/2”
2 – 2×2 @ 103”
2 – 2×2 @ 40”

General Instructions

Please read through the entire plan and all comments before beginning this project. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain.

Step 1
You’ll need to make three of these. If you have a nailer, that will be the best way to go. Keep outside edges flush and use glue. TIP: Make sure your stretcher board fits in the middle opening.

Step 2
Next add the top and bottom.

Step 3
Now add the decorative pieces. You’ll cut these with a jigsaw and sand smooth first before attaching.

Step 4
And then the base board.

Step 5
Now add the top board.

Step 6
Adding feet will make your table sit on the six little feet – very handy if you have uneven floors. Then you can just shim the one foot not cooperating.

Step 7
Now it gets fun! Put the stretcher in place.

Step 8
And now let’s move on to the table top. I highly recommend a Kreg Jig here.

Step 9
And the decorative aprons. Don’t forget the glue here.

Step 10
Add the finishing touches here. Use glue and screws or nails. Predrill to avoid wood splitting.

Step 11
Now we can add the base!

Finishing Instructions

Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed.

VN:F [1.9.21_1169]
Rating: 6.7/10 (32 votes cast)
VN:F [1.9.21_1169]
Rating: +3 (from 5 votes)
triple pedistal farmhouse table woodworking plans, 6.7 out of 10 based on 32 ratings

Comments

comments


Powered By SageFox. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
SageFox PowerPoint - PowerPoint Slides - PowerPoint Images - Social Tags - Woodworking Plans - eLiquid eJuice | Health Remedies - DIY Ally