Latest Items

bath shelf woodworking plans

Added/Modified on October 21, 2016
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
VN:F [1.9.21_1169]
Rating: 5.8/10 (4 votes cast)


Tape Measure
Saw – Jig, Circular, or Miter


3 – 2×2 at 6’
Half sheet of ¾” plywood


Edge banding for plywood, optional
4 – 8” angle brackets
8 – 4″ or 5″ angle brackets
Spray paint to match finish (for brackets, optional)
Wood filler
Wood glue
Finishing Supplies

Cut List

3 – 2×2 at 47-1/2” – Legs
4 – ¾” plywood at 12” x 16” – Shelves


Read through the entire set of instructions and all comments before beginning this project. If you print out or save our plans, be sure to check back before starting your build, to be sure you have the most up to date set of plans. Use glue to secure your joints and Consider Painting or Staining individual sections prior to assembling. This makes the paint application virtually flawless. Coat with a spray on Poly or Wipe on Poly to protect your finish and your piece and it will last for ages. Adhere to all safety standards and guidelines, and be sure you follow safety protocol throughout your build. If you are unsure about whether you are building safely, run a quick online search for the tool or technique you are using.

Step 1

Cut the pieces for the shelves. Cut the notches and the curve using a jig saw. Apply edge banding, if desired.

Step 2

Cut the pieces for the legs. Attach the shelves at the spacing shown using corner brackets. Three brackets per shelf will be used.

Finishing Instructions

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired.

VN:F [1.9.21_1169]
Rating: 5.8/10 (4 votes cast)
VN:F [1.9.21_1169]
Rating: 0 (from 0 votes)
bath shelf woodworking plans, 5.8 out of 10 based on 4 ratings



Powered By SageFox. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
Free PowerPoint Templates - PowerPoint Slides - TagFox Memes