-
Media Cabinet woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Countersink Bit for Drill Square Sander Kreg Jig Lumber 2 – 2×2 at 6’ 1 – 1×2 at 8’ 1 – 1×3 at 3’ 1 – 1×4...
- Posted/Updated 7 years ago
-
bathroom cabinet woodworking plans
Frame up Begin by cutting the main parts to size. Next, prepare a 1/4″-thick x 1/4″-wide, two-sided groove along the rear edge of each cabinet side. These grooves, called “rabbets,” are made to accept the plywood back...
- Posted/Updated 7 years ago
-
modular bar cabinet woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Countersink Bit Square Sander Kreg Jig Lumber One full sheet of ¾” plywood One half sheet of ½” plywood Piece of 3-1/2” trim at 18” Materials 1-1/4”...
- Posted/Updated 7 years ago
-
bathroom cabinet woodworking plans
Framed This cupboard is built with simple butt joints. Begin with the sides of the cupboard and cut them to length. Factory-laminated pine is often slightly thinner than standard 3/4″-thick sheets, and the measurements in the materials...
- Posted/Updated 7 years ago
-
CD storage cabinet Woodworking Plans
Drawer Boxes Start by cutting all of the drawer box parts as listed on page 50. Start with the 6 1/4″-wide sides, fronts and backs. Three strips ripped from the length of an eight-foot sheet of veneered...
- Posted/Updated 7 years ago
-
French Canadian cabinet woodworking plans
Face Frame Foundation Start this cabinet by making four simple face frames that form the foundation of the project. Cut the front and back stiles, the side stiles, and the top and bottom rails to size, then...
- Posted/Updated 7 years ago
-
triple console cabinet woodworking plans
Shopping List: 3 sets euro style bottom corner mount drawer slides, 16” length 3 – sets inset hinges 24 – cup style handles 8 – 2×2 @ 8 feet long 6 – 1×3 @ 8 feet long...
- Posted/Updated 7 years ago
-
cabinet woodworking plans
Tools Tape Measure Saw – Jig, Circular, or Miter Drill Square Sander Kreg Jig Brad nailer Lumber Full sheet of ¾” plywood Quarter sheet of ¾” plywood Quarter sheet of ½” plywood Scrap of ¼” plywood at...
- Posted/Updated 8 years ago
