wall mounted bookcase woodworking plans
-
- Step 1
-
- Step 2
Tools
Tape Measure
Saw – Jig, Circular, or Miter
Drill
Square
Sander
Lumber
2 – 2×2 at 6’
2 – 1×12 at 6’
1 – 1×12 at 3’
Materials
10 – 8” corner brackets
Spray paint to match finish (for brackets, optional)
Wood filler
Sandpaper
Wood glue
Finishing Supplies
Cut List
2 – 2×2 at 59” – Legs
4 – 1×12 at 32” – Shelves
Instructions
Please read through the entire plan and all comments before beginning this project. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain.
Step 1
Cut the pieces for the shelves. Cut the notches using a jig saw.
Step 2
Cut the pieces for the legs. Attach the shelves at the spacing shown using corner brackets. Two brackets per shelf will be used.
Finishing Instructions
Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired.
wall mounted bookcase woodworking plans,
